If you are experiencing the volume randomly going up to eardrum shattering levels or going down to a whisper for no reason at all.... it is because of the silly touch (over) sensitive volume controls on the device.
Disconnect the iPig and remove the 4 screws on the base of the unit. Be careful as you take the sub woofer out. Make sure not to pull too hard or you may sever the cable going to the PCB. Unplug the black cable from the sub woofer by pressing down on the small metal clip, this will give you more space to manoeuvre inside the iPig. Look inside the iPig and you will see two pink and white cables coming down from the area where the iPigs ears are. These cables connect to a PCB. Disconnect both of these cables and reconnect the black cable to your sub woofer.... then re-assemble the iPig.
Your iPig should now work properly albeit without the touch sensitive ears. Just use your remote control and you are good to go. Happy Days! Comment if you have any questions....
